Table of Contents
Advertisement
MODELS: WT-46809 / WS-55809 / WS-55819 / WS-65809 / WS-65819
[Convergence Circuit]
23. Fine Convergence
Measuring
-----
Instrument
Test Point
-----
------
Ext. Trigger
Measuring
-----
Range
NTSC -- None
Input Signal
HD -- HD sync
Input Terminal
Video & DTV Inputs
CONVERGENCE MODE
Activate ........MENU-0-1-5-9
Misc. ........................."6"
Coarse........................"5"
Fine ..........................."4"
Color (R,G or B)......AUDIO
Item No..................VIDEO
Adjust/Move..........ADJUST
Cursor Toggle.........ENTER
Save & Exit.....MENU (twice)
Purpose:
To converge red, green and blue at the edges of the screen
Symptom:
Color edging at the edges of the picture.
SD Fine Adjustment
1. Select an External Input, no signal.
2. Activate the Convergence Mode, Fine Red.
3. Use the Cursor to converge red on the green.
4. Select the Fine Blue mode.
5. Use the Cursor to converge blue on the green.
6. Exit the Convergence mode.
HD Fine Adjustment
1. Supply an HD signal (sync only) to the DTV inputs and select DTV with the
"Audio" button.
(If no HD signal is available, use the Conv. HD No Signal Procedure.)
2. Repeat SD Steps 2 through 7, in the HD mode.
CONV. HD WITH NO SIGNAL
1. MENU-0-1-7-0
2. Set DTV Port to 1080i
3. MENU (twice)
4. INPUT select DTV Inputs
5. MENU-0-1-5-9
After adjusting, set the
Page 44
DTV Port to AUTO
Advertisement
Table of Contents
