Mitsubishi Electric WT-46809 Service Manual page 26

MODELS: WT-46809 / WS-55809 / WS-55819 / WS-65809 / WS-65819
Cursor Coordinates
Specific intersections in the Cross-
hatch are assigned vertical and
horizontal coordinates. These are
shown in the adjacent diagram. The
Cursor can only be moved to those
positions that have coordinates
assigned. If the Cursor is at coordi-
nates outside the screen area, the
Cursor will not be visible. Use the
ADJUST buttons to move the Cursor
to an intersection on the screen.
Display
The on-screen display changes in the Fine mode, as shown at the right. The display shows the vertical
and horizontal data for the current Cursor Position, and the horizontal and vertical coordinates for that
position.
G. Saving Data and Exiting the Convergence Mode
Press MENU twice to exit the Convergence mode, data is automatically saved.
Page 26