The New Port Could Not Be Created Is Displayed; Other Troubleshooting Tips; Specifying The Printer's Ip Address - Canon PIXMA iX7000 Network Setup Manual

The New port could not be created is Displayed

Action
Uninstall the drivers, then setup the printer again.
• For the setup procedure, follow the procedures in "Wired LAN
Connection" (P.23) and onward in the printed manual: Getting Started.

Other Troubleshooting Tips

Specifying the Printer's IP Address

Action
Assign an IP address and other values to the printer manually if, for example, there is no
DHCP function in the environment where the printer is used.
A
B
C
1
Select Use next IP address (A).
2
Enter the value you want to specify for each of IP Address, Subnet Mask and
Default Gateway (B), then click Connect (C).
1
Select Use following IP address in TCP/IP Setting (A).
2
Enter the value you want to specify for each of IP Address, Subnet Mask and
Router (B), then click Connect (C).
Glossary
• DHCP function
A function that automatically assigns required information (IP address, etc.) to computers connected to
the Internet.
• IP address
A numerical identification assigned to each computer or network device connected to a network.
• Subnet mask
A number used to distinguish the network and host portions of an IP address.
• Default gateway
A device required to connect to external networks.
• The printer cannot be used on external networks such as the Internet.
A
B
C