Canon PIXMA iX7000 Network Setup Manual
Canon pixma ix7000: network guide
Hide thumbs
Also See for PIXMA iX7000:
- Getting started (62 pages) ,
- Specifications (2 pages) ,
- Getting started (85 pages)
Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Canon PIXMA iX7000
Summary of Contents for Canon PIXMA iX7000
- Page 1 Network Setup Troubleshooting...
-
Page 2: Table Of Contents
Basic Guide/Advanced Guide. Cannot Connect to the Printer The Printer is Not Displayed (Detected) on the Canon IJ Network Tool Screen The Printer is Not Displayed (Detected) on the Printers Screen The Printer is Not Displayed (Detected) on the Printer Setup Utility Screen... -
Page 3: Cannot Connect To The Printer
Cannot Connect to the Printer The Printer is Not Displayed (Detected) on the Canon IJ Network Tool Screen Check Make sure that you follow Check 2 and 3 of "Connection Checklist" on page 5, then click Update (A). The Printer is Not Displayed (Detected) on the Printers Screen... -
Page 4: The Printer Is Not Detected After The Network Environment Is Changed
If the problem is not solved even after following Check 1 to 3, specify the IP address of the printer. • For details on how to specify the IP address, refer to "Specifying the Printer's IP Address" on page 3. Glossary •... -
Page 5: The New Port Could Not Be Created Is Displayed
Other Troubleshooting Tips Specifying the Printer's IP Address Action Assign an IP address and other values to the printer manually if, for example, there is no DHCP function in the environment where the printer is used. Select Use next IP address (A). -
Page 6: Changing The Port Name
By changing the port name, you can change the name of the printer. • When you set up an additional computer to use the printer whose port name you changed, the printer is displayed with the changed port name. When two or more computers are set up, the changed name is displayed. -
Page 7: Connection Checklist
If the printer is already turned on, turn it off, then turn it back on. Check 3 Is the USB cable connected properly? (The USB cable is required for network settings when setting up the printer on the network for the first time.) If the USB cable is loose, connect it properly. -
Page 8: Specifications
Windows: Operation can only be guaranteed on a PC with Windows Vista, XP or 2000 pre-installed. • To upgrade from Windows XP to Windows Vista, first uninstall software bundled with the Canon inkjet printer. • Macintosh: Hard Disk must be formatted as Mac OS Extended (Journaled) or Mac OS Extended. - Page 9 QT5-2706-V01 XXXXXXXX ©CANON INC.2009 PRINTED IN THAILAND...