Table Of Contents - Canon PIXMA iX7000 Network Setup Manual

Network Setup Troubleshooting
This manual mainly describes problems you may encounter when setting up a network, and the possible
causes and solutions.
Find a description related to your problem and follow the solution.
If you cannot find a description for your problem or if you encounter a problem after setup, refer to the on-
screen manual: Basic Guide/Advanced Guide.
Cannot Connect to the Printer
The Printer is Not Displayed (Detected) on the Canon IJ Network Tool Screen
The Printer is Not Displayed (Detected) on the Printers Screen
The Printer is Not Displayed (Detected) on the Printer Setup Utility Screen
The Printer is Not Detected after the Network Environment is Changed
Message is Displayed
during Software Installation
The Set Printer IP Address Screen is Displayed
The New port could not be created is Displayed
Other Troubleshooting Tips
Specifying the Printer's IP Address
Changing the Port Name
Restoring the Printer's Default LAN Setting to Perform Setup Again
Printing the Printer's Network Setting Information
Connection Checklist
Specifications
The following symbols are used in this manual.
Instructions as notes for operation or additional explanations.
Glossary
Explanation of terminology.
Description for Windows users.
P.1
Description for Macintosh users.
P.1
P.1
P.1
P.2
P.2
P.2
P.3
P.3
P.3
P.4
P.4
P.4
P.5
P.6