Right Middle Cowl
Do not apply excessive force to the right
middle cowl to prevent damaging the
carbon component.
❙
Removal
1. Remove the lower cowl.
2
2. Remove the lock pin.
3. Release the studs.
4. Remove the right middle cowl.
5. Disconnect the connector while holding
the right middle cowl.
❙
Installation
Install the parts in the reverse order of
removal.
When installing the right middle cowl,
u
the front edge of the right middle cowl is
aligned with the upper cowl and reserve
tank cover first.
P. 68
Right middle cowl
Removing & Installing Body Components u
Lock pin
Upper cowl
Studs
Right middle cowl
Right Middle Cowl
Connector
Reserve tank cover
69