Top Shelter - Honda RC213V-S 2016 Manual

Top Shelter

Titanium bolt
Titanium bolts
Do not apply excessive force to the top
shelter to prevent damaging the carbon
component.
Top shelter
❙
Removal
1. Remove the seat.
2. Remove the titanium bolts using the
5 mm Hex wrench that is stored on
the left side of the frame.
3. Remove the top shelter.
❙
Installation
1. Install the top shelter.
2. Apply molybdenum disulfide grease
(containing more than 3% molybdenum
disulfide additive) to the titanium bolt
threads.
3. Install and tighten the titanium bolts.
Torque: 7 lbf·ft (10 N·m, 1.0 kgf·m)
If a torque wrench was not used for
installation, see your dealer as soon as
possible to verify proper assembly.
Removing & Installing Body Components u
P. 70
2
Top Shelter
71