Braun UVL Series Operator's Manual page 20

W ARNING
Discontinue lift use
immediately if any
lift component does
not operate prop-
erly. Failure to do so
may result in serious
bodily injury and/or
property damage.
The inner roll stop automatically
folds down to the platform sur-
face (horizontal) during the stow
function (as platform retracts).
Interlock Feature: The inner roll
stop senses weight (pressure) to
prohibit lift operation. The lift will
not function if the inner roll stop
is occupied.
Page 18
Operation Notes and Details
Discontinue lift operation immedi-
ately if the inner roll stop does not
operate properly.
Outer Barrier: The two-stage
outer barrier provides a ramp for
wheelchair loading and unload-
ing at ground level (see photos
on following page). When the
platform lowers fully to ground
level, the electric actuator unfolds
(rotates) the barriers to the ramp
position (fully unfolded).
The tall outer barrier is spring
loaded but driven by the electric
actuator-powered short outer bar-
rier to rotate from the ramp (hori-
zontal) position to the deployed
(vertical) position.
Note: The tall outer barrier must
be manually raised and lowered
from the platform surface when
extending and retracting the
platform. Details are provided on
pages 20 and 21.
Although the outer barriers are
lift-powered, the activation of the
barriers are controlled by the lift
operator (attendant). Pressing
the DOWN switch unfolds the
barriers. The actuator-powered
two-stage outer barriers fold (ro-
tate) to the vertical position when
the UP switch is pressed.
Interlock Features: The outer
barriers sense weight to pro-
hibit lift operation. The lift will not
function if the outer barriers are
occupied. Lift platform move-
ment shall be interrupted unless
the outer barrier is fully deployed
(up).