Canon PIXMA iP6000D Printing Manual page 77

When Automatic Print Head Aligning Cannot Be Executed Correctly
Note
When automatic print head aligning cannot be executed correctly, the POWER
lamp flashes orange 11 times and the message "Failed to align print head" is
displayed on the LCD. Please follow the procedure below.
1. Press the RESUME
2. Open the cover and check if there is ink left. If there is no ink left, replace
the ink tanks. See "Replacing Ink Tanks" on page 67.
3. Print the nozzle check pattern to verify that the print nozzles are clean.
See "Printing the Nozzle Check Pattern" on page 71.
4. Move the printer so that the paper output slot is not in direct sunlight and
try automatic print head aligning again.
5. If the error persists, adjust the print head manually. See "Adjusting the
Print Head Manually" on page 78.
RESUME RESUME button to clear the error. RESUME
POWER POWER POWER
76