Canon PIXMA iP4500 Series Quick Start Manual page 94

Cleaning the printer Use a damp cloth to clean the printer. Never use flammable
solvents such as alcohol, benzene or thinners.
If flammable solvents come in contact with electrical
components inside the printer, it could cause a fire or electric
shock.
Always unplug the printer from the power outlet before cleaning the printer.
If you accidentally switch the printer on while cleaning it, you could injure yourself or damage the
printer.
Maintaining the Do not attempt to disassemble or modify the printer. There are no user serviceable parts inside the
printer printer.
The printer contains high-voltage components. Never attempt any maintenance procedure not
described in this guide.
Working around the Do not use highly flammable sprays near the printer.
printer
This could cause a fire or electric shock if the spray comes into contact with electrical components
inside the printer.
Caution
You may cause injury or damage the printer if you ignore any of these safety precautions.
Choosing a location Do not install the printer in a location that is unstable or subject to excessive vibration.
Do not install the printer in locations that are very humid or dusty, in direct sunlight, outdoors, or
close to a heating source.
To avoid the risk of fire or electric shocks, install the printer in a location with an ambient
temperature range of 5°C to 35°C (41°F to 95°F) and humidity of 10% to 90% (condensation free).
Do not place the printer on a thick rug or carpet.
Do not place the printer with its back attached to the wall.
Power supply Ensure that the area around the power outlet is kept clear at
all times so you can easily unplug the power cord if
necessary.
Never remove the plug by pulling on the cord.
Do not use an extension lead/cord.
90 Safety Precautions