Canon PIXMA iP4500 Series Quick Start Manual page 22

2
Load the envelopes.
(1) Load the envelope against the Cover Guide
(the right side of the Paper Support). Load with
the address side facing UP and the rear flaps
DOWN on the left. Up to 10 envelopes can be
loaded at once.
.
Important
Make sure that the Cover Guide is set upright,
when you load paper in the Rear Tray.
(2) Pinch the Paper Guide and slide it against the
left side of the envelope.
.
Note
Do not slide the Paper Guide too strong. Paper
may not be fed properly.
(3) Press the Paper Feed Switch so that the Rear Tray lamp lights up.
3
Specify the settings in the printer driver.
(1) Select Envelope in Media Type.
(2) Select the size for envelopes.
In Windows, select DL Env. or Comm. Env. #10 in Page Size.
In Macintosh, select DL Envelope or #10 Envelope in Paper Size.
(3) Select Landscape in Orientation.
.
Important
Be sure to set the printer driver setting properly. If you do not, the address will be printed in the
wrong direction.
Note
For details on printer driver settings, see "Printing with Windows" on page 22 or "Printing with
Macintosh" on page 23.
18 Before Using the Printer
(2) (B)
(A) Printing Orientation
(B) Make sure the flaps are folded.
(1)
(3)
(A)