Before Using the Printer
Turning the Printer On and Off
Turn on the printer before printing.
Note
Auto Power On/Off Feature
You can set the printer to turn on and off automatically.
Auto Power On: Automatically turns on the printer when print data is sent from the computer.
Auto Power Off: Automatically turns off the printer when no print data is sent for a certain interval.
Set this setting in the Maintenance sheet of the printer driver in Windows
on a Macintosh
Utility
Turning on the Printer
Before turning on the printer, confirm the following.
The Print Head and ink tanks are set into place.
The printer is connected to your computer (or a compatible device).
The printer driver is installed.
Note
If preparatory operations above are not complete, follow your setup sheet to complete them.
1
Press the
POWER
The POWER lamp flashes green, and changes to
steady, non-flashing light.
Important
If the ALARM lamp begins to flash orange, see
"ALARM Lamp Flashes Orange" on page 77.
2
Turn on your computer.
2
Before Using the Printer
®
. For setting details, refer to the
button.
®
, and in the Canon IJ Printer
PC Printing Guide on-screen manual
.