Error Writing To Usbxxx - Canon BJC-S200 User Manual

Error Writing to USBxxx

Ensure the printer is plugged in.
The cartridge holder will not move unless the printer is plugged in. Check to see if the
power cord is plugged into the power supply securely. If not, close the front cover, and
then plug the printer to the power supply.
Ensure the printer is securely connected to the computer.
Note
If you are using a switch box or other devices, remove and reconnect the
printer directly to the computer and try printing again.
If printing is now successful, there may be a problem with the device.
Also there could be a problem with the cable(s). Replace the cable(s) and
try printing again.
If spooling is enabled, disable it to send the print data directly to the printer and try
printing again.
1
Open the Printer Properties dialog box.
2
On the Details tab, click Spool Settings and then select Print directly to
the printer.
Opening the Printer Properties Dialog Box
An Error Message is Displayed on the Screen
Troubleshooting
Windows
159