Canon PIXMA MX700 Series Network Setup Manual page 30

Problem
The Set Printer IP Address dialog box
is displayed during setup
(Continued)
The Enter Password or Password
Input dialog box is displayed during
setup
30
Possible Cause and Measures
The IP address currently set for the machine is displayed on the dialog box.
(1)TCP/IP Setting
Select Get IP address automatically or Use following IP address.
Select Get IP address automatically to use an IP address provided by a
DHCP server. This requires that the DHCP function is enabled on the router.
Select Use following IP address to manually specify an IP address, for
example if there is no DHCP server functionality in the network environment
in which you are using the machine.
IP Address/Subnet Mask/Router
Enter each value to specify a fixed IP address when Use following IP
address is selected.
(2)Network Information
Click to display the Network Information dialog box, and confirm network
settings when your machine cannot be detected automatically during setup
for use over the network.
(3)Connect
Click to search for the machine with the specified settings. If the machine is
still not detected with a specified IP address, see "Cannot connect to the
machine (the machine is not detected)" on page 28.
The following dialog box is displayed if an administrator password is set to the
machine which has already been set up.
Admin Password
Enter the administrator password you have set. The administrator password
consists of alphanumeric characters and is no longer than 32 characters. The
password is case sensitive.
For security, your entry will be displayed by "*" (asterisks) in Windows and "•"
(bullets) in Macintosh.
(1)
(2)
(3)