Table of Contents
Advertisement
Identification
1. Rogowski Coil - The measurement coil of flex clamp meter
2. Clamp Lock - Turn the knob counter-clockwise to unlock the clamp; turn
clockwise to lock the clamp.
3. LCD - Displays measurement data and function modes
4. "HOLD "/
the unit ON/OFF.
5. "
" and " INRUSH " - Press to turn ON/OFF backlight. Press and hold for 2
seconds to turn ON/OFF inrush measurement mode
6."RANGE" and "Hz" - Press to switch between 30.00A/300.0A/3000A/Auto;
The Default is Auto
7. Power and Range Shift Switch: Set to A for current measurement, V for AC voltage
measurement, and Ω for resistance measurement.
8. Voltage and Resistance Measurement Input:
Maximum AC voltage measurement is 600V, maximum resistance is 60MΩ
Symbols on the Unit
Double Insulation
Grounding
Warning
AC
DC
6
- Press to turn ON/OFF hold mode. Press and hold to turn
1
2
3
4
5
6
7
Figure 1
8
Low Battery
AC/DC
High Voltage Danger
Complies with European
Union Standards
ETL Standard Certification
Advertisement
Table of Contents
