Canon MultiPASS MP390 Setup Sheet page 5

Align the print head from the operation panel.
Be sure to align the position of the print head to ensure print quality.
1
Print the print head position pattern.
q
This message appears.
If this message
does not
appear after
closing the
scan unit, see
page 118 of the
User's Guide.
2
Enter checkmarks in the printed patterns.
From column A to column K on the printout,
place a checkmark by the pattern that shows
the most solid box (least number of white
stripes).
3
Align the print head.
Using the operation panel, enter the value of the pattern you checked in step 2, then
press [Set].
Pattern numbers
4 3
Repeat step for columns B through K.
You have completed installation and alignment.
If you are connecting the machine to a computer for use, see
instructions on installing the software.
w
Press
[Set].
Press [+] to increase the number by one digit.
Columns (A to E)
Press [–] to decrease the number by one digit.
Columns (F to K)
e
The machine prints
a print head
position pattern.
Column A
BAD SAMPLE
Least solid box
GOOD SAMPLE
Most solid box
q
Press [+] or [-] to select
the pattern number of
the good sample.
, and
w
Press [Set].
for