Using Printer Control (Windows 98/Me Only) - Canon MultiPASS F60 Software User's Manual

In your Windows application for your document, make sure the
number of copies to print is set to 1. Banner printing does not operate
properly if you specify more than one copy.
When Banner printing is selected, certain print options may be
unavailable.
To prepare your printer for banner printing:
1. Cut the banner paper one sheet longer than the document requires.
2. Insert the banner paper into your printer. Make sure the printing
surface faces up.
3. Gently hold the sheet in place until paper feeding starts.
To set your banner printing options and print your banner:
1. In the Printing Type box, click Banner Printing.
2. If the banner printing message box appears, click OK.
3. In the Printer Properties dialog box, click OK.
4. In the Print dialog box click the print command (usually OK or Print).
If you are prompted to accept your printing options, click OK.

Using Printer Control (Windows 98/Me only)

You can define settings that control certain print operations.
1. On the Page Setup tab, click Printer Control.
Chapter 3
0
Printing 35