Heath Zenith Secure Home 5215 Quick Start Manual page 3

Mounting Sensor
Wall Mount
❒ Mount the sensor 5 to 9 feet (1.5 to 2.7 meters) above
the ground. Place the sensor below or beside the
lighting fixture so that the light from the fixture
will not hit the sensor. Secure the sensor to the
wall with the screws provided. It will be necessary
to tilt the sensor head to the side when mounting.
NOTE: Mounting the sensor directly above the lamps
may increase false triggering.
598-1345-01
Ceiling Mount
3
❒ Plug the adapter
cord(s) into the
sensor module.The
adapter cord's plug
is polarized for proper
installation.
❒ The sensor/control is capable of controlling two
lamp adapters. This illustration shows a typical
installation with two lamp adapters controlling PAR-
38 lamps. Note the sensor is below the lamps and
there is sufficient cord from the adapters to form a
drip loop to prevent water from running down the
cords and into the sensor. Also, the lamps must
stay at least 1" (25mm) from the sensor.