Table of Contents
Advertisement
3
Connect a
Make sure the computer is turned off.
bi-directional
parallel cable to
You can purchase a Centronics-compatible, parallel cable with bi-directional
the MultiPASS
capability from your dealer or from any computer store. Make sure the cable is
C5500.
IEEE 1284-compliant.
A cable of 6.6 feet or less in length is recommended.
Align the cable connector with the interface port so the shapes match.
Gently press the cable connector into the port.
Secure the cable connector by snapping the two wire clips (located on the sides
of the port) into the cable connector.
Connect the other end of the cable to the parallel interface port
on your computer.
If you plan to use the MultiPASS C5500 without connecting it to your computer,
see Appendix B of your User's Manual for instructions on how to program your
name and fax number.
CANON MPC-5500/QSG, Page 7 - File: 55-QSP7.eps
W. Swanlund
7
CORREX> August 12 '98
Advertisement
Table of Contents
