Definitions: Safety Guidelines; General Safety Instructions - DeWalt DW729KN Original Instructions Manual

RADIAL ARM SAW
DW729K
Congratulations!
You have chosen a D WALT tool. Years of experience, thorough product development and
e
innovation make D WALT one of the most reliable partners for professional power tool users.
e
Technical Data
Power input
Power output
Type
Voltage
Blade diameter
Blade bore
Spindle diameter
No‑load speed, 50 Hz
Load speed, 50 Hz
Depth of cut at 90°
Max. crosscut capacity at 0°
Max. mitre cut capacity at 45°
right hand
left hand
Depth of cut at 45°
Max. crosscut capacity at 0°
Max. mitre cut capacity at 45°
right hand
left hand
Overall dimensions (with legstand)
Dust extraction adapter
Recommended dust extraction values
Air velocity at the point of connection
Volume metric flow
Vacuum value at the point of connection
Dust extraction port
Cross area section
Dust extraction port
Cross area section
Weight
Automatic blade brake time
Duty cycle
Protection grade
Noise values and vibration values (triax vector sum) according to EN61029‑1:
L (emission sound pressure level)
PA
L (sound power level)
WA
K (uncertainty for the given sound level)
Vibration emission value a =
h
Uncertainty K =
NOTE: The figures are emission levels and are not necessarily safe working levels. Whilst there
is a correlation between the emission and exposure levels, this cannot be used reliably to
determine whether or not further precautions are required. Factors that influence the actual
level of exposure of the workforce include the characteristics of the workroom and the other
sources of noise, etc. i.e. the number of machines and other adjacent processes. Also, the
permissible exposure level can vary from country to country. This information, however, will
enable the user of the machine to make a better evaluation of the hazard and risk.
EC‑Declaration of Conformity
o
Machinery Directive
DW729KN
Radial Arm Saw
W 4000
DW729KN
W 3300
D
e
2
2006/42/EC, EN60204‑1:2018; EN1870‑17:2012 +A:2015.
V 400
These products also comply with Directive 2014/30/EU and 2011/65/EU. For more information,
mm 350
please contact D
mm 30 The undersigned is responsible for compilation of the technical file and makes this declaration
on behalf of D
mm 30
min ‑1 3000
min 2780
‑1
mm 110
Markus Rompel
mm 525
Vice‑President Engineering, PTE‑Europe
D
e
mm 365
65510, Idstein, Germany
mm 150
20.11.2020
a
mm 75
mm 525

Definitions: Safety Guidelines

mm 250
The definitions below describe the level of severity for each signal word. Please read the
manual and pay attention to these symbols.
mm 270

cm 181 X 134 X 152
mm 100


m/s 20
m³/h 500
PA 5000/2400
mm 100

cm 2 78.5

mm 40
cm 2 12.6

General Safety Instructions

kg 149

< 10sek
min 1'/3'
Read all of these instructions before attempting to operate this product and save
IP5X
these instructions.
dB(A) 96
1 . Keep work area clear.
dB(A) 3.0
dB(A) 109
2 . Consider work area environment.
m/s 2 2.0
m/s 2 1.9
3 . Guard against electric shock.
4 . Keep other persons away.
5 . Store idle tools.
6 . Do not force the tool.
7 . Use the right tool.
8 . Dress properly.
9 . Use protective equipment.
WALT declares that these products described under Technical Data are in compliance with:
WALT at the following address or refer to the back of the manual.
e
WALT.
e
WALT, Richard‑Klinger‑Straße 11,
WARNING: To reduce the risk of injury, read the instruction manual.
DANGER: Indicates an imminently hazardous situation which, if not avoided, will result
in death or serious injury.
WARNING: Indicates a potentially hazardous situation which, if not avoided, could result
in death or serious injury.
CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result
in minor or moderate injury.
NOTICE: Indicates a practice not related to personal injury which, if not avoided, may
result in property damage.
Denotes risk of electric shock.
Denotes risk of fire.
WARNING: When using electric tools basic safety precautions should always be followed
to reduce the risk of fire, electric shock and personal injury including the following.
SAVE THIS MANUAL FOR FUTURE REFERENCE
- Cluttered areas and benches invite injuries.
- Do not expose the tool to rain. Do not use the tool in damp or wet conditions. Keep the
work area well lit (250 - 300 Lux). Do not use the tool where there is a risk of causing fire or
explosion, e.g. in the presence of flammable liquids and gases.
- Avoid body contact with earthed surfaces (e.g., pipes, radiators, cookers and refrigerators).
When using the tool under extreme conditions (e.g., high humidity, when metal swarf is
being produced, etc.), electric safety can be improved by inserting an isolating transformer
or a (FI) earth-leakage circuit-breaker.
- Do not let persons, especially children, not involved with the work, touch the tool or the
extension cord and keep them away from the work area.
- When not in use, tools must be stored in a dry place and locked up securely, out of reach
of children.
- It will do the job better and safer at the rate to which it was intended.
- Do not force small tools to do the job of a heavy duty tool. Do not use tools for purposes
not intended; for example do not use circular saws to cut tree limbs or logs.
- Do not wear loose clothing or jewellery, as these can be caught in moving parts. Non-skid
footwear is recommended when working outdoors. Wear protective hair covering to
contain long hair.
ENGLIsh
23