Receiving While Performing Other Tasks; Receiving Faxes In Memory When A Problem Occurs; Canceling Receiving - Canon imageCLASS D880 Fax Manual

Receiving While Performing Other Tasks

Since the machine is a multitasking device, it can receive faxes and voice calls while you are performing other
tasks.
If you receive a fax while you are performing other tasks, the machine stores the incoming fax in memory. Then,
as soon as you finish your task, your fax will be received.
• If you are copying or printing, printing of the received fax is suspended and then resumed after copying
or printing is finished.
NOTE

Receiving Faxes in Memory When a Problem Occurs

If the machine encounters a problem when it is receiving a fax, the machine automatically stores the unprinted
pages of the fax in memory, and the LCD displays RECEIVED IN MEMORY. When the problem is cleared, the
machine automatically prints the stored fax in memory. For an explanation of the messages that appear on the
LCD display, and details on the action to take, → p. 8-1.
• The machine memory can store up to approximately 255 pages.*
• Once the pages are printed, they are deleted from memory.
NOTE
• If the memory becomes full, you will not be able to receive the remaining pages. Contact the other
party and ask them to resend the remainder of the fax.
• The maximum number of pages that the machine's memory can store differs depending on the other
party's machine.
* Based on the condition that the other party sends the fax to imageCLASS D880, in the ITU-T No.1 Chart,
Standard mode.

Canceling Receiving

Follow this procedure to stop receiving a fax before reception is completed:
Press Stop/Reset.
• The machine asks you to confirm if you want to
cancel.
C A N C E L D U R I N G T X / R X ?
< Y E S N O >
Press 4 (–) to cancel receiving.
• If you change your mind and want to continue
receiving, press e (+).
5
5-9