Printing A List To Check Information Registered In Your Machine - Canon imageCLASS D880 Fax Manual

Press Additional Functions.
U S E R S E T T I N G S
1 . T E L L I N E S E T T I N G S
Use 4 (–) or e (+) to select 2.UNIT
NAME.
U S E R S E T T I N G S
2 . U N I T N A M E
Press Set.
_
Ex:
Use the numeric keys to enter your name
or company's name (max. 24 characters,
including spaces).
C A N O N
Ex:
Printing a List to Check Information Registered in
Your Machine
You can print the User's Data List to check the sender information and current settings of your machine.
Press Additional Functions.
Use 4 (–) or e (+) to select 7.PRINT
LISTS.
A D D I T I O N A L F U N C T I O N S
7 . P R I N T L I S T S
The sender information is shown at the top of the list. The current settings of the machine are listed after this.
12/03/2004 16:40 FAX 123 4567
1. COMMON SETTINGS
DEFAULT SETTINGS
SW AFTER AUTO CLR
VOLUME CONTROL
KEYPAD VOLUME
ALARM VOLUME
TX DONE TONE
RX DONE TONE
: A
: A
CANON
*****************************
USER S DATA LIST
***
*****************************
COPY
DEFAULT MODE
ON
VOLUME
ON
VOLUME
ERROR ONLY
VOLUME
ERROR ONLY
• If you are unsure how to enter characters,
→ p. 2-1.
• If you have already registered your name or
company's name, previous entry will be displayed.
To change your name, press Clear to delete the
previous entry and re-enter.
• Press Space to enter a space and move the cursor
to the right.
• If you make a mistake, press 4 (–) or e (+) to
move the cursor to the incorrect character, then
press Delete. Or press Clear to delete all the
characters you entered.
Press Set.
D A T A E N T R Y O K
Ex:
U S E R S E T T I N G S
3 . T X T E R M I N A L I D
Press Stop/Reset to return to the standby
display.
Press Set twice.
P R I N T L I S T S
1 . U S E R D A T A
• The machine returns to the standby mode then
prints the User's Data List.
***
1
1
1
: A
001
2
2-5