HP Digital Sender 8100C Administrator's Manual page 61

60
Control panel messages (continued)
Message
Search error.
Sorry, you have typed an
incorrect password. Please
retype your password.
This operation can require
several minutes. Do you
really want to proceed?
This user is not registered.
Please add them.
This will clear the
configuration and all the
destinations. Do you really
want to proceed?
This will clear your changes.
Do you really want to
proceed?
The user name you typed
was not found. Contact the
administrator.
The WINS configuration is
inconsistent. Please check.
You do not have sufficient
access rights.
You need to become a
registered user to use this
digital sender. Please contact
your admin.
All manuals and user guides at all-guides.com
Description
An unexpected problem
occurred in the LDAP search
(for example, memory
shortage, or problem with the
network link or LDAP server).
The digital sender did not
recognize the password you
typed.
You are being asked to
confirm that you want to
check the address book
database.
The user needs a user
profile.
You are being asked to
confirm that you want to reset
the digital sender to the
factory defaults.
You are being asked to
confirm that you want to
discard all changes that you
have made in the
configuration menu.
The digital sender did not
recognize the user name you
entered.
There is a problem with the
WINS (Windows Internet
Naming Service)
configuration.
The account name used to
authenticate searches with
LDAP server has insufficient
rights to access the
information.
Allow user self-registration in the
General configuration menu is
disabled.
Actions
Try the search again.
Turn the digital sender off and then back
on.
If the problem persists, contact
HP customer support.
Press any key to clear the message, and
then retype the password. Passwords are
case-sensitive, so make sure you enter
the correct combination of lowercase and
uppercase letters.
Check the user profile for the password.
Press O to continue with the database
K
check or press C
ANCEL
continue, the digital sender shuts down
and restarts.
See "Creating and maintaining user
profiles" on page 41.
Press O to continue with the reset or
K
press C to cancel.
ANCEL
Press O to discard your changes; this
K
takes you out of the configuration menu.
Press C to return to the
ANCEL
configuration menu, where you can use
S to save the changes before exiting.
AVE
Make sure the name is correct and try
again.
Try reentering the information in the
Network configuration menu.
If the problem persists, contact
HP customer support.
Use the E-mail configuration menu at the
control panel to change the account name
and password.
The administrator must add the user. See
"Creating and maintaining user profiles"
on page 41.
Enable Allow user self-registration.
to cancel. If you