Capt Problems - Canon imageCLASS D660 Printer Manual

CAPT Problems

CAPT Problems

CAPT Problems CAPT Problems
Problem
CAPT is not working
properly
Cannot use Adobe Type
Manager (ATM) fonts
Cannot print with a
printer driver other than
the Canon PC1200/iC
D600/iR1200G
CD-ROM Menu doesn't
appear automatically
Cause
The CAPT (Canon
PC1200/iC D600/
iR1200G) is not
selected as the default
printer driver for
imageCLASS D600
series.
The software might not
be installed properly.
The printer driver is
connected to the same
port as the Canon
PC1200/iC D600/
iR1200G printer driver.
Autorun CD-ROM
Menu checkbox is
unchecked in the CD-
ROM menu.
The "Auto insert
notification" checkbox
is unchecked.
Solution
Specify the CAPT (Canon PC1200/iC
D600/iR1200G) as the default driver for
the imageCLASS D600 series.
Refer to "Using the Trouble Shooter" on
page 5-8.
To check if the CAPT is installed
correctly, try printing a page from an
application. If the print fails, the CAPT is
not installed correctly. Remove the CAPT
and install it again. For more information,
see "Uninstalling the CAPT" on page 5-
10.
Adobe Type Manager (ATM) is not
supported.
Connect the printer driver to a port
different from the Canon PC1200/iC
D600/iR1200G printer driver.
Start the CD-ROM menu manually, and
check the "Autorun CD-ROM Menu"
checkbox.
From the Device Manager make sure that
the "Auto insert notification" checkbox
is checked in the CD-ROM drive
Properties dialog box. For more
information, see Windows Help.
5
5-4