Installing The Cartridge - Canon imageCLASS D340 Setup Sheet

Installing the Cartridge

1 Remove the new cartridge from its protective bag.
NOTE
• Save the protective bag. You may need it later when you remove the cartridge.
2 Rock the cartridge 5 or 6 times to distribute the toner evenly.
Instructions
NOTE
• Always hold the cartridge as shown so that the side with the instructions are facing upward. Do not
forcefully move or push the protective shutter of the drum in any way.
3 Place the cartridge on a flat and stable surface, grip the sealing tape tab and
snap it in the direction shown below. Make sure that the tab itself is detached
from the cartridge.
4 While grasping the cartridge firmly, slowly pull the sealing tape tab with the
other hand to remove the sealing tape completely. Discard the tape.
5 Open the right cover.
Right cover
Drum protective shutter
Tab
IMPORTANT
• Be sure to remove the sealing tape completely.
Otherwise, toner will not be supplied to the machine
and no image or text will be transferred to the page.
• To avoid breaking the sealing tape when removing,
pull the tab straight out. Do not pull it out at an
upward or downward angle.
Turn over to
Turn over to
continue
continue