Changing The Start-Up Image Or Sound - Canon Powershot SX20 IS User Manual

Changing the Start-up Image or Sound

In the 3 tab, you can set one of your recorded images as the start-up image
when the camera power is turned on, or change the sounds played for each
camera operation with your recorded sounds. However, when starting the
camera with the viewfinder display, the start-up image will not display, and
there will be no start-up sound.
Change Sounds
Changing the Start-up Screen
Registering the Start-up Screen
When you press the 1 button and set the camera to Playback mode, you
can register sounds and images.
152
Choose [Sound Options], then press the m
●
button.
Press the op buttons or turn the  dial to
●
choose an option.
Press the qr buttons to choose a setting.
●
1 Preset sounds.
You can register your sounds using the supplied
2
software (p. 153).
Choose [Start-up Image], then press the m
●
button.
Press the qr buttons to choose a setting.
●
No start-up image.
1 Preset images.
2 You can register your images.
Choose [Start-up Image], then press the m
●
button.
Press the qr buttons to choose [2], then
●
press the m button.