Canon Powershot SX20 IS User Manual page 118

Viewing Images in Filtered Playback
Jump by
What if you can't choose a filter?
When you chose
date, you can only choose one filter. Also, you can only choose
images sorted into categories in
Filter playback
In filter playback (Step 2), you can view filtered images with "g Searching
Images Using Index Display" (p. 116), "Viewing Slideshows" (p. 119), and
"Magnifying Images" (p. 121). You can process all filtered images at once while
performing operations in "Protecting Images" (p. 124), "Erasing All Images"
(p. 127), or "Printing from the Print List (DPOF)" (p. 137), by choosing [All Filtered
Images].
However, if you change the category (p. 129), or edit an image and save it as a
new image (p. 132), a message will appear, and filtered playback will cancel.
118
Viewing images using filter
playback.
Pressing the m button will start filtered
●
playback, and the jump method and a
yellow frame will appear.
If you press the qr buttons or turn the
●
 dial, the chosen target images will
display.
Pressing the d button displays [Filtered
●
playback settings cleared]. Pressing the
m button cancels filtered playback.
and Images
In single image playback, press the d
●
button, then press the op buttons to
choose a jump method.
If you press the qr buttons, the display
●
will advance to the image that is the
chosen number of images away.
Pressing the n button restores the
●
single image display.
in Step 1 on p. 117, if there are only images with the same
.
if there are no