Serial Interface - Canon Powershot S10 Software Starter Manual

Settings for Applications that Start Automatically
• Follow the procedures below to start ZoomBrowser EX without first displaying the
[PowerShot S10 Event] or [PowerShot S20 Event] dialog.
1. Open the [My Computer] window while the camera is connected to the
computer via the USB interface.
2. Open the [Control Panel] and select [Scanners and Cameras] and either
[PowerShot S10] or [PowerShot S20].
3. Click the [Properties] button and display the [Events] tab.
4. A list of applications registered for automatic starting will display. Remove the
checks beside every program except for ZoomBrowser EX. Click the [OK] button.
ZoomBrowser EX will now start automatically the next time you connect the camera. If the
[Disable device events] option has a check mark, the automatic start will be turned off.

Serial Interface

Click the [IMPORT IMAGES] button and select [From Camera]. Thumbnail images
will display in the camera window. (
Having Trouble Connecting to the Computer?
If the settings for the COM port are not correct, the [Communication Settings]
dialog will display. (It will not display if you are connecting via a USB port.)
• Set the port type, port name and baud rate settings and click the [OK] button.
• Select [RS-232C] for the port type. For the port name, select the port to
which the interface cable is connected. If you are uncertain about the port
to which it is connected, click the [Detect] button.
• There is usually no need to change the baud rate setting from 115.2 K,
but if you are having trouble with the connection, try a slower baud rate.
16
p. 17)