Canon Powershot TX1 User Manual page 93

2
Select
Recording time will be displayed.
Press the Multi Controller
to change the sample rate. Sound
quality will improve in the order of
[11.025kHz], [22.050kHz],
[44.100kHz]*, but the recorded file
size will also increase respectively.
* Default setting.
When pushing in the Multi
Controller (FUNC./SET), recording
will stop. Pushing in the Multi Controller (FUNC./SET) once
again will start a new recording.
Sound Control Panel
Exit
Record
Pause
Play
Rewind
Hold the Multi Controller (FUNC./SET) to rewind (no sound plays).
Fast Forword
Push in and hold the Multi Controller (FUNC./SET) to fast forward
(no sound plays)
Erase
Select [Erase] or [Erase All] on the screen and push in the Multi
Controller (FUNC./SET).
Protect
Set or cancel by pushing in the Multi Controller (FUNC./SET).
Volume
It can be adjusted by pressing the Multi Controller
Check that the [Audio] setting (p. 43) is appropriate before
recording.
(Record) and press .
or
Available
Recording Time
Sound Control Panel
or .
91