Canon Powershot TX1 User Manual page 27

Set up Menu
Menu Item
Mute
Volume
Start-up Vol.
Operation Vol.
Selftimer Vol.
Shutter Volume
Playback Vol.
Audio
Mic Level
Level
Wind Filter
LCD Brightness
Power Saving
Auto Power
Down
Display Off
Options
On/Off* Set to [On] to silence all sounds
except warning sounds. (Basic p. 11)
Off/1/2*/3/4/5 Adjusts the volume of the start-up
sound, operation sound, self-timer
sound, shutter sound and playback
sound. The volume cannot be
adjusted if [Mute] is set to [On].
Adjusts the volume of the start-up
sound when the camera is turned on.
Adjusts the volume of the operation
sound that plays when any button other
than the shutter button is pressed.
Adjusts the volume of the self-timer sound
played 2 sec. before the shutter is released.
Adjusts the volume of the sound
played when the shutter releases.
The shutter sound does not play
when a movie is recording.
Adjusts the playback volume of movies,
sound memos or recorded sounds.
p. 43
Auto*/Manual Sets method of adjustment for the
sound recording level.
-40 to 0 dB Sets the sound recording level.
On/Off* Reduces wind noise.
-7 to 0* to +7 Press the Multi Controller
adjust the brightness. You can check
the brightness in the LCD monitor
while you are adjusting the setting.
p. 18
On*/Off Sets whether or not the camera
automatically powers down after a
set period of time elapses without
the camera being operated.
10 sec./20 sec./ Sets the length of time before the
30 sec./1 min.*/ LCD monitor turns off when no
2 min./3min. camera operation is performed.
* Default setting
Page/Topic
or to
25