Canon Powershot TX1 User Manual page 116

3
Select an image or record a sound.
Start-up Image
Press the Multi Controller
to select the image you wish to
register and push in the Multi
Controller (FUNC./SET).
Start-up, Operation, Self-timer
and Shutter Sounds
Select
Multi Controller (FUNC./SET). After
recording, select
push in the Multi Controller (FUNC./
SET).
- Recording will automatically stop when the recording time
elapses.
- To play it, select
- To exit instead of registering, press
4
Select [OK] and press
To cancel registering, select
[Cancel].
The following cannot be registered as My Camera settings.
- Movies
- Sounds recorded with the sound memo function (p. 89)
- Sounds recorded with the sound recorder function (p. 90)
The prior setting is erased when a new My Camera setting
is added.
See the supplied Software Starter Guide for more information
on creating and adding to the My Camera data.
114
(Record) and push in the
(Register) and
(Play).
or
(Exit).
.