Canon Powershot TX1 User Manual page 65

4
Aim the camera so that the original color
appears at the center of the LCD monitor
and press the Multi Controller
Only one color can be specified.
You can press the Multi Controller
range of colors that are swapped.
• -5: Only takes the color that you want to swap
• +5: Also takes colors close to the one that you want to
swap
5
Aim the camera so that the desired color
appears at the center of the LCD monitor
and press the Multi Controller
• Only one color can be specified.
6
Press
shoot.
The default setting for color swap mode changes green into
white.
You may not obtain the expected results if you use the
flash.
The specified color and color input range will be retained
even if the camera's power is turned off.
to complete the setting, then
.
or to specify the
.
63