Table of Contents
Advertisement
TRANSPORT AND HANDLING
Do not lift the washer-dryer by holding it at the worktop.
1.
Turn off the water, and unplug the washer-dryer.
2.
Make sure that door and detergent dispenser are properly closed.
3.
Disconnect the inlet hose from the water tap, and remove the drain
hose from your draining point. Empty all the water remaining in the
hoses and secure the latter so that they do not get damaged during
transport.
4.
Reinsert the four (4) transport bolts. Follow the instructions for
removing the transport bolts in the "Installation Instructions" in
reverse order.
IMPORTANT: Do not transport the washer-dryer without having the
transport bolts properly inserted.
11
Hide quick links:
Advertisement
Table of Contents
