Call Logging (SMDR)
Set the Baudrate for the serial port.
You must set the Baudrate of the XN120 serial port to the same as the COM port of the PC connected to it with
program 10-21-02.
1
Program 10-21-02
Set the Baudrate of the serial
port of the EXIFU card.
16
10-21-02
COM Baud Rate
Ø Enter 0-3 for the Baudrate.
Ø Press HOLD to confirm the entry.
Ø Press DC several times when you are done to return to the
Program Mode.
Ø (Press SPK to save changes and exit if you are finished).
2
0=4800bps
1=9600bps
2=19200bps
3=38400bps
XN120 EXIFU Guide