NEC EXIFU-A1 Installation, Configuration And Operation page 12

Configure the EXIFU Card
Making Changes
· With the Program Number entered and the curser positioned at the first entry you can change the value
by entering the new one with the numeric keys of the XN120 phone.
·
When you have entered the new value press HOLD to confirm it and move to the next entry.
·
You can also press HOLD to step on to the next if you did not make any changes to the entry.
Exiting Configuration Mode
·
When you exit configuration mode your changes will be saved into the battery-backed memory.
! Until you exit any changes you have made are stored in temporary memory and will be lost if the power is
switched off to the XN120.
1 Press HOLD to confirm your
current entry.
2 Press DC several times.
3 Press SPK.
When the save is complete the
phone returns to normal
operation.
12
11-02-01Ex Prt1
Extension No200
Program Mode
SavingSystemData
MON 27 16:28PM
200 EXT200
XN120 EXIFU Guide