MSI KM4M Series Manual page 64

PS2KB Wake Up from S3
This setting allows you to enter "Hot Key" (max. 8 numbers) to wake up
the system from S3 state. Settings are: Disable, Ctrl+F1~Ctrl+F12,
Power, Wake, Any Key.
PS2MS Wake Up from S3
This setting allows the activity of the mouse to wake up the system from
S3 state. Settings are: Enabled and Disabled.
USB Resume from S3
This item allows the activity of the USB device to wake up the system
from S3 (Suspend to RAM) state. Settings are: Enabled and Disabled.
VGA, LPT & COM, HDD & FDD, PCI Master
These fields specify whether the system will be awakened from power
saving modes when activity or input signal of the specified hardware
peripheral or component is detected.
Wake Up On PME
When set to Enabled, the feature allows your system to be awakened
from the power saving modes through any event on PME (Power Man-
agement Event). Settings are: Enabled and Disabled.
Resume By Alarm
The field is used to enable or disable the feature of booting up the system
on a scheduled time/date.
Date(of Month) Alarm
The field specifies the date for Resume By RTC Alarm. Settings: 0~31.
Time(hh:mm:ss) Alarm
The field specifies the time for Resume By RTC Alarm. Format is <hour>
<minute><second>.
MSI Reminds You...
If you have changed this setting, you must let the system boot up
until it enters the operating system, before this function will work.
BIOS Setup
3-23