Table of Contents
Advertisement
MS-6734 M-ATX Mainboard
driver to initialize the VGA card. Therefore, if the AGP driver of the card does
not support the initialization feature, the display may work abnormally or not
function after resuming form S3. Options: Auto, Yes, No.
After AC Power Lost
This setting specifies whether your system will reboot after a power failure or
interrupt occurs. Available settings are:
Power Off
Power On
Last State
IRQ/Event Activity Detect
Press <Enter> and the following sub-menu appears.
PS2KB Wakeup Select
The item specify how the system will be awakened from power saving
mode when input signal of the keyboard is detected. If set to Hot Key, it
allows you to select the options in PS2 KB Wake UP from S3. If set to
Password, please press <Enter> to input password and its maximum
password is 8 numbers. Options are: Hot Key, Password.
3-22
Leaves the computer in the power off state.
Leaves the computer in the power on state.
Restores the system to the previous status before power
failure or interrupt occurred.
Hide quick links:
Advertisement
Table of Contents
