ION Trailblazer User Manual page 8

Bass and Treble Control
To adjust the treble level:
1. Press the EQ button. "HI" (high frequency) will appear on the display.
2. Turn the Control Knob to the left to decrease the high frequency.
3. Turn the Control Knob to the right to increase the high frequency.
4. Press the EQ button to confirm.
To adjust the bass level:
1. Press the EQ button. "LO" (low frequency) will appear on the display.
2. Turn the Control Knob to the left to decrease the low frequency.
3. Turn the Control Knob to the right to increase the low frequency.
4. Press the EQ button to confirm.
Pairing a Bluetooth Device
Note: To disable voice prompts, double press the Bluetooth button.
1. Make sure the speaker is within range of your Bluetooth device (no more than 100 ft. /
30.5 m away).
2. Press the Bluetooth button on the speaker.
3. Navigate to your Bluetooth device's setup screen. Then find and select Trailblazer. Do
not connect to Trailblazer_BLE; this is reserved exclusively for connecting to the ION
™
Sound XP app.
4. If your Bluetooth device prompts for a pairing code, enter 0000.
Note: If you have previously connected to your Bluetooth device, Trailblazer
reconnect automatically.
Tip: Double-press the Bluetooth button to enable or disable the Bluetooth pairing voice
prompts.
To disconnect a paired Bluetooth device, press the Bluetooth button.
Linking Two Speakers
™
Note: Trailblazer
ionaudio.com for a list of compatible speakers.
1. Power on both speakers.
2. Press and hold the Link button on both speakers to enter Stereo Link mode. A tone will
play until both speakers are linked. Once a link has been established, the word LINK will
appear in the display.
Note: It may take up to 1 minute to make the connection.
3. Select which unit will be the primary speaker (L channel) by pressing and holding the
Bluetooth button.
4. To disconnect, double press the Link button on one of the two speakers.
8
is not compatible with all ION PA models for wireless linking. See
™
will