Download
Share
Print this page
ION Total PA Max Quick Start Manual
  1. Manuals
  2. Brands
  3. ION Manuals
  4. Speakers
  5. Total PA Max
  6. Quick start manual

ION Total PA Max Quick Start Manual

Hide thumbs Also See for Total PA Max:
1
2
3
4
5
6
7

Advertisement

Quick Links

Download this manual
Quickstart Guide (English)
Introduction
1. Make sure all items listed in the
foam sheet for the speaker stand rubber feet, speaker stand mounting knob, power cable, and
microphone.
2. Read the safety instruction booklet before using the product.
3. Study the
Connection
4. Make sure all input devices such as microphones, CD players, or digital media players are turned
off and volume settings are set at "zero."
5. Connect all devices as shown.
6. Switch everything on in the following order:
• audio input sources (i.e. microphones, instruments, CD players)
• Total PA Max
7. When turning off, always reverse this operation:
• Total PA Max
• any input devices
Box Contents
Total PA Max
Microphone with Cable
Telescoping Speaker Stand
Remote Control
Power Cable (IEC)
Quickstart Guide
Safety Instructions & Warranty Information Booklet
Support
For the latest information about this product (system requirements, compatibility information, etc.)
and product registration, visit ionaudio.com.
For additional product support, visit ionaudio.com/support.
Caution: Do not expose Total PA Max to rain or standing water.
Box Contents
Diagram.
are included in the box. Look in the box under the
3

Advertisement

loading

Related Manuals for ION Total PA Max

Summary of Contents for ION Total PA Max

  • Page 1 Safety Instructions & Warranty Information Booklet Support For the latest information about this product (system requirements, compatibility information, etc.) and product registration, visit ionaudio.com. For additional product support, visit ionaudio.com/support. Caution: Do not expose Total PA Max to rain or standing water.

  • Page 2: Quick Setup

    4. On Total PA Max, adjust the bottom knob counter-clockwise so the screw is not blocking the opening. 5. Line up the Total PA Max mounting hole with the speaker stand pole and place on the pole. 6. Tighten the mounting knob clockwise on Total PA Max.

  • Page 3: Rear Panel

    8. XLR Input (XLR): Connect a line-level mixer or musical instrument to this XLR line-level input. Control the volume using the Aux Input Volume knob. Use this line- level input when linking together two Total PA Max units. 9. RCA Inputs: Connect a CD player, digital media player, mixer, or other media source to these inputs.

  • Page 4: Media Panel

    18. Light Mode Button: Press this button to select how the lights on the front panel function: • Color Cycle: The lights slowly glow and cycle through colors. Press and hold the light mode button to freeze the lights on one color. This is the default mode when Total PA Max is first powered on. •...
  • Page 5 Media Panel Remote Note: Aim the remote straight at the front of the speaker woofer. Room lighting and battery life can affect the operating range of the remote control. Note: In order to use the remote control for the first time, first pull out the tab attached to the battery compartment.

  • Page 6: Operation

    3. Power on Total PA Max. 4. Touch and briefly hold your device to the NFC logo located on Total PA Max’s rear panel. 5. Follow the pairing instructions that appear on your phone. If a passcode is required, enter “0000”.

  • Page 7: Troubleshooting

    Also, try to reduce the overall volume of Total PA Max. If there is too much bass: Try adjusting the tone or EQ control from Total PA Max or your sound source to lower the bass level. This will allow you to play the music louder before clipping (distortion) occurs.