Brother P-Touch 2400 User Manual page 120

Error Message
NO
TAPE!
REPLACE
BATTERIES!
ROM
PROBLEM!
SET 1" TAPE!
SET 24mm
TAPE!
SET 3/4"
TAPE!
SET 18mm
TAPE!
SET 1/2"
TAPE!
SET 12mm
TAPE!
SET 3/8"
TAPE!
SET 9mm
TAPE!
116
Cause
• This message appears if you
hold down
Code Code
Length Length
or try to print a label or
T T
feed the tape when no tape
cassette is installed.
• This message appears if the
installed alkaline batteries
are about to run out.
• This message appears if there
is a problem with the
machine's read only mem-
ory.
• This message appears if a 1"
(24-mm)-wide tape cassette
is not installed when a layout
for 1" (24-mm)-wide tape is
selected.
• This message appears if a
3/4" (18-mm)-wide tape cas-
sette is not installed when a
layout for 3/4" (18-mm)-wide
tape is selected.
• This message appears if a
1/2" (12-mm)-wide tape cas-
sette is not installed when a
layout for 1/2" (12-mm)-wide
tape is selected.
• This message appears if a
3/8" (9-mm)-wide tape cas-
sette is not installed when a
layout for 3/8" (9-mm)-wide
tape is selected.
• Install a tape cassette and try
again.
and press
• Replace the batteries or use
the AC adaptor.
• Contact your service repre-
sentative.
• Install a 1" (24-mm)-wide
tape cassette.
• Install a 3/4" (18-mm)-wide
tape cassette.
• Install a 1/2" (12-mm)-wide
tape cassette.
• Install a 3/8" (9-mm)-wide
tape cassette.
Solution