Brother P-Touch 2400 User Manual page 118

Error Message
BUFFER
FULL!
CASSETTE
CHANGED!
CHANGE
ADAPTOR!
CUTTER
ERROR!
INPUT
WHOLE CODE!
114
Cause
• This message appears if you
try to enter a character, sym-
bol, barcode, space, return,
new block, or tab after 255
characters have already been
entered.
• This message appears if you
try to enter a character, sym-
bol, barcode, or space in a
layout field while using the
Auto format function after
255 characters have already
been entered.
• This message appears if the
tape cassette is changed
between the moment that the
data begins to be received
until the moment that the
print command is received.
• This message appears if a
high-voltage adaptor is
being used.
• This message appears if the
tape cutter is closed when
you try to print or feed the
tape.
• This message appears if the
set number of digits is not
entered in the barcode data.
Solution
• Delete some existing text so
that more text can be
entered.
• Edit the text so that it only
contains the preset number
of characters.
• Cancel the print job, install
the correct tape cassette, and
then try printing again.
• Remove the high-voltage
adaptor and connect the
adaptor designed exclu-
sively for this machine.
• Turn the machine off, then on
again.
• Input the correct number of
digits or change the number
of digits set in the barcode
parameters.