Attaching Labels - Brother P-touch 2300 User Manual

Brother labeling system user's guide p-touch 2300, p-touch 2310
Hide thumbs Also See for P-touch 2300:
Table of Contents

Advertisement

Available languages

Available languages

LAMINATED TAPE
The enclosed stick enables you to easily remove the backing from labels printed on laminated tapes.
1 Hold the tape in your left hand, with the printed surface facing up, and hold the stick in
your right hand.
2 Pass the tape halfway through the long narrow hole in the stick.
3 Turn the stick three-quarters of a turn towards you and pull the stick away from you as
shown below.
4 Peel off the label backing.
FABRIC TAPE
Fabric tape is used to attach a piece of fabric printed with your text onto garments using an
iron. After printing the text onto fabric tape and cutting off the label using scissors, place the
label on an ironed garment at the location where you wish to attach it in such a way that the
printed text can be read correctly. Cover the label with another piece of cloth and use an iron
set to a medium-high temperature (320 to 356 ˚F (160 to 180 ˚C)) to press down firmly for 10
to 15 seconds. For more details, refer to the instructions included with the fabric tape cassette.
STAMP TAPE
Refer to pages 36 through 38 for a detailed explanation on using the stamp tape to make stamps.

ATTACHING LABELS

19

Hide quick links:

Advertisement

Chapters

Table of Contents
loading

This manual is also suitable for:

P-touch 2310

Table of Contents