Tab Function - Brother P-Touch 2300 User Manual

Tape widths
1/4" (6 mm)
3/8" (9 mm)
1/2" (12 mm)
3/4" (18 mm)
1" (24 mm)
Stamp 3/4" (18 mm)
Stamp 1" (24 mm)
The return key can also be used to select an item from a list (e.g., add a symbol or accented
character to the text) or to apply a selected setting.
Some questions asking you to confirm a command may appear on the LCD display, especially
when the function that you have chosen will delete or affect files. In these cases, pressing
r is like answering "yes".
To answer "no", press *. Refer to DELETE KEY on page 30.
To add a new line:
Press r. The return mark (
G
To select an item from a list:
Press r.
G
To answer "yes":
Press r.
G
This function allows you to separate sections of a line of text by adding tabs. This enables you
to create perfectly aligned columns without having to type in several spaces. All tabs have the
same length and are measured from either the beginning of the line or the previous tab if there
is more than one. The tab length can be set between 0.0" and 11.8" (0.0 and 30.0 cm).
The text can contain no more than 50 tabs. If 50 tabs have already been added to the
text when Q is pressed, the error message "TAB LIMIT!" appears.
28
Maximum number of lines that can be printed
) appears to indicate the end of the line.

TAB FUNCTION

2
2
3
6
6
3
5