Numbering Function - Brother P-Touch 1800 User Manual

This function can be used to print many copies of the same text while increasing a certain
number in the text by 1 after each label is printed.
To use the Numbering function:
1
Press ,
you wish to increase.
2
Hold down
in the display.
3
Press the number key (
To cancel the Numbering, hold down
Clear
Mirror
4
Press
displayed while it is being printed.
After printing using the NONE tape magin setting, hold down
press
printed characters may be cut off.
5
Press down on the tape cutter lever to cut the tape, and then use scissors to cut
along the printed dots to separate the labels.
EXAMPLE
To print three labels with numbers 1, 2 and 3:
1
Position the cursor below "1".
70

NUMBERING FUNCTION

, Home or
and press
Font
to
Á
).
(or ) to begin printing the labels. The number of each copy is
Feed
once to feed the tape before cutting it, otherwise some of the
to position the cursor below the number that
End
Number
. The message "NUMBER UNTIL 1–9?" appears
M.Del
) of the last number that is to be printed.
Alt
1: S T U D I O 1 _
Caps
Font 1 Font 2
Number
and press (or press just
Auto
and
Length
Underline
Frame