Brother Network MFC-7840W Network User's Manual page 75

LCD messages when using the SES/WPS/AOSS control panel menu
LCD shows
Setting WLAN
Connecting SES
Connecting WPS
Connecting AOSS
Connected
Incorrect Mode
Connection NG
Connection error
m
Click Finish.
You have completed the wireless network setup. If you would like to continue installing drivers and
software necessary for operating your device, please choose Start Here OSX from the CD-ROM
menu.
Wireless configuration for Macintosh
Connection status
Searching or accessing the access
point, and downloading settings from the
access point
Connecting the access point
Connection succeeded.
Session overlap is detected.
Connection failed.
Connection failed.
(If it is shown after
the LCD shows
Setting WLAN.)
Session overlap is
detected.
®
using the Brother installer application
Action
—
—
—
Check that only one router or access point has
the Wi-Fi Protected Setup™ mode or the
AOSS™ mode enabled and try starting from i
again.
1 Try starting i again.
2 If the same message continues, reset the
machine back to the factory settings and try
again.
Check that only one router or access point has
the SecureEasySetup™ mode, the Wi-Fi
Protected Setup™ mode or the AOSS™ mode
enabled and try starting from i again.
5
66