IndraControl XFE 01.1 Extension Mod-
ules Profibus, RT-Ethernet, Sercos, CAN
LED
Color
ERR
Red
RUN
Green
Tab. 12-1: LEDs of the extension module
The LEDs are displayed as described after the control startup and
after the initialization of the extension modules!
12.1.2 LED on XD1 plug
Fig. 12-2: LEDs on the XD1 plug
The following function is assigned to the LED on the XD1 plug:
LED
Color
PW
Green
ON
Green
U
Green
L
Tab. 12-2: LED function on the XD1 plug
13 Error causes and troubleshooting
For operating and error displays, refer to
LED
LED display
Voltage power connector
PW
LED is off
ON
LED is off
Function
LED displays the bus error acc. to the CANopen standard "CiA 303
Part 3: Indicator Specification"
LED displays the bus state acc. to the CANopen standard "CiA 303
Part 3: Indicator Specification"
PW
UL
Function
Internal voltages are present
Internally programmed function blocks are loaded
24 V supply voltage connected and within the permitted range
chapter 12.1 "LEDs" on page 22
Cause
Internal voltage error:
Voltage transformer is defective
●
24 V supply voltage is not connected
●
24 V supply voltage is connected with reverse
●
polarity
Internally programmed function block is not loaded
Error causes and troubleshooting
ON
R911345570_Edition 05 Bosch Rexroth AG
23/31