Required Accessories - Bosch Rexroth WE6/BVP1 Series Operating Instructions Manual

24/48 Mounting
Valve mounting screws
Subplates
Throttle inserts
locating pin
Ordering address for
accessories and valves
Bosch Rexroth AG, WE6../.B..VP1..., RE23178-VP1-B/06.16

7.6 Required accessories

The following accessories are recommended for the connection of the valve. These
accessories are not included in the scope of delivery and can be ordered separately
from Bosch Rexroth:
For reasons of stability, exclusively use the following valve mounting screws.
Table 11: Valve mounting screws
Type
ISO 4762-M5x50-10.9-flZn-
240h-L
For subplates with dimensions for valves with porting pattern according to
ISO 4401, refer to "Data sheet 45100".
Table 12: Throttle inserts
Throttle diameter
0.8 mm
1.0 mm
1.2 mm
Table 13: locating pins for porting pattern according to ISO 4401-03-02-0-05
Dimensions
3 × 8 according to EN ISO 8752
The addresses of our responsible sales organizations can be found on the Internet at
www.boschrexroth.com
and in the appendix, 16.1 "List of addresses".
Quantity Friction coefficient according to
VDA 235-101
4 0.09...0.14
Material number
R900152065
R900152066
R900152067
Material number
R90005694
Material number
R913000064