Understanding the Error Messages
Once you are familiar with the types of errors that can occur while
you're using the PhotoCapture Center
troubleshoot any difficulties.
When an error message appears on the LCD, the machine will beep
to get your attention.
—
Media Error
that is either bad or not formatted, or when there is a problem with
the media drive. To clear this error, take out the media card.
This message will appear if you try to access the media
—
No File
card in the drive (slot) does not contain a .JPG file.
Out of Memory
images that are too large for the machine's memory.
Unsupported Card
media card that is not supported.
Using PhotoCapture Center
your PC
You can access the media card that is in the media drive (slot) of the
machine from your PC.
See Using PhotoCapture Center
PhotoCapture Center
Guide on the CD-ROM or Using the PhotoCapture Center
®
Macintosh
(MFC-3320CN and MFC-3820CN only) on page 9-24 in
Software User's Guide on the CD-ROM.)
Using PhotoCapture Center
scanning documents
You can scan the documents into a media card. (See Scan to Card
(MFC-3320CN and MFC-3820CN only) on page 2-22 in Software
User's Guide on the CD-ROM.)
11 - 13 WALK-UP PHOTOCAPTURE CENTER
This message will appear if you insert a media card
This message will appear if you are working with
—
This message will appear if you insert a
—
™
from your PC on page 7-1 in Software User's
™
, you can easily identify and
™
from your PC. (See Using the
™
™
from
™
from a
™
for