To Run The Network Test; Diagnostics Screen - 3Com EtherLink 3C905C-TX User Manual

58 C
HAPTER
Figure 11 Diagnostics Screen
If the Run Remote Wake-Up Test button appears dimmed,
the NIC that is installed in the PC does not support
Remote Wake-Up.

To Run the Network Test

Run the Network Test to check the NIC connectivity to
the network.
1 Click Run Network Test on the Diagnostics screen.
The Network Connectivity Test screen appears.
2 Click Start.
If the test fails:
If the test passes, the NIC connection to the network is
functioning correctly.
3 Click Close.
6: T
ROUBLESHOOTING AND
Make sure that the NIC is properly connected to the
network cable.
Make sure that the hub or switch to which the NIC is
connected is powered on.
Make sure that the cable complies with the proper
length and specifications for your network.
D
IAGNOSTICS