Table of Contents
Advertisement
Step 3. To release the previous IP settings in your computer, run the command
"ipconfig / release." (Figure A-26)
Step 4. To obtain new IP settings from NIC, run "ipconfig / renew." As listed
below, the IP address is your client computer's LAN IP address, and the
Default Gateway is Broadband Router's IP address. Make sure that your IP
Address is 192.168.1.xxx (xxx ranges from 2 to 254), your Subnet Mask is
255.255.255.0, and your Default Gateway is 192.168.1.1. These values
confirm that your Broadband Router is functioning. (Figure A-27)
Figure A–26
Figure A-27
57
Advertisement
Table of Contents
